Benkal shelving System   ·         Benkal/Supermarket Shelving System is a total solution design that is manufactured by Taqaddom. It guarantees total flexibility according to customer’s needs and latest international recommendations (25 mm system). It is subject to a quality management system meeting the technical and engineering requirements and International specifications. ·         All our metal products are painted with Electrostatic Powder Coating (EPOXY) using a special automatic painting system; this has curing and stoving ovens after 4 stages of cleaning by special chemical materials, hot water, Phosphate and DI water. ·         Taqaddom Benkal/Supermarket shelving System has been widely utilized by thousands of supermarkets, retail and shopping malls in Palestine and other countries.   ·         Main applications include: supermarket, retailers, shops and many others. ·         This system is an ideal solution for light-duty storage capacity and its advantages are:                       More selectivity: stores different products on each level                       More capacity: significantly increases shelf density                         Total Flexibility: each shelf is independent and adjusted every 25 mm                       Fast operation: goods are accessed from aisle                       Lower Costs: no lost travel time entering racks                       Efficiency: optimum visibility and accessibility Benkal Uprights are made of metal squared pipes 50/50 mm, 2 mm thick. Uprights are provided with special perforations in order to connect legs (25-60 cm long) made of CR metal sheet of 1.8 mm thick. The upright and the leg are both provided with adjustable 12 mm feet to balance it firmly on the floor. These legs are 20 cm high, it carries the bottom shelf, and holds the bottom panel. Benkal Uprights are perforated in the front side every 25 mm, according to the latest designs in the world. The top side of the upright has a plastic cap on the top. Uprights can either be mounted to the wall (single side), or installed in the middle as (double-sided) arrangement. Shelves are provided with triple side bends to guarantee safety and work efficiency. Shelves are made of CR metal sheets, 1 mm thick, provided with reinforcement metal bar(s) welded in the middle of the shelf by automatic “Spot Welding” machines. ·         Shelves are quite flexibly assembled or disassembled by pressing it firmly over its right and left consoles, it can be installed quickly and easily. ·         Shelves are provided with side bends in order to be installed over the consoles firmly, quickly and easily. ·         Shelves have round bends in the back to guarantee safety and work efficiency ·         Shelves can be decorated with a front edge as a label slot for labelling, sorting and pricing. ·         Each shelf can carry up to 100 kg of distributed weight. ·         Consoles (triangles) are the holders of the shelves; they are 2 models: Double: made of CR steel of 1.8 mm thick where every 2 shelves share 1 console, it has 8 joining notches connected through the perforated holes inside the column, and 6 small notches for safety. Single: made of CR steel of 3 mm thick where each shelf is independent, it has 4 joining notches connected through the perforated holes inside the column, and 3 small notches for safety. ·         Consoles can carry loads of more than 300 kg. Double sided arrangement is equipped with partitioning sheets, which is connected between each 2 uprights. It joins the uprights together firmly and protects the uprights and whole system from swivelling or collapsing. At the same time it prevents goods from mixing up. Partitioning sheets are made of separation sheets of 40 cm and 60 cm height, 1 mm thick steel, can be perforated in order to give nice and stylish finish or for hanging products using wire hooks. Full engineering and CAD/CAM simulation design support. Main Menu